The Right Manufacturers Come Up With The Best Environmental Test Chambers

A climatic chamber is a device that helps to artificially create environmental conditions. They are used in research centers, where equipment is being developed for engineering, defense and aviation industries. Such a device is designed to measure and control humidity and air temperature and combines many functions of the test chamber. With the right environmental test chamber manufacturers the end result always comes proper.

What is the climate chamber?

• In the climatic chamber there is a working volume, a refrigerating unit, a steam generator, an automatic control panel.
• The working volume is a cabinet inside which a heat exchanger is installed, by means of which a test mode is provided. The design of the working volume includes: a viewing window, a swing door, a frost protection system.
• The cooling unit is located on the mounting plate, which is located inside the frame. It is designed so that the air is distributed throughout the chamber.
• The shield is located on the side wall of the working volume. It has all the basic electrical equipment. The control panel is located on the top panel of the camera.
• Most often the devices are made of mirror stainless steel, because it is for a long time that it retains its original appearance and characteristics when used.

Areas of application:

Climate chambers are in demand in research and production, production. Let's highlight the main areas of application:

• pharmaceutical industry;
• food industry;
• cosmetic industry;
• fundamental research;
• analysis of bio-testing;
• testing of properties of biological media and materials under the influence of temperature and light;
• Determination of water toxicity.

Main characteristics:

In the climate chambers there is a monitoring and control system. It is based on a logic controller, which gives it the ability to control cameras as much as possible through analog and digital interfaces. In all models of climatic chambers, the entire part is made of stainless steel, which is resistant to steam. The drain is hidden under the technological door. This of course depends on the environmental chamber manufacturers.

The device has a noise reduction system. It is located in the engine room, which allows it to reduce the noise level of the camera. By custom, the noise level can be reduced significantly.

• There is also a double ceiling and a double bottom. This helps to better distribute the air inside the chamber. Due to this, no condensation occurs. The air treatment system controls the climatic parameters inside the chamber, and a powerful fan helps to quickly change the temperature of the air and the object.
• The device provides a reliable cooling system that retains its thermodynamic performance at any temperature. Also you can connect several cameras to the PC to provide more local and remote control.
• The equipment is built on a modular basis, which makes maintenance simple. The camera is easily accessible regardless of its location. The control system is installed on the front panel.
• Let's pay attention to the humidification system. They have several important advantages. First, the device works qualitatively without the use of distilled water. Secondly, it uses "dry" steam, which prevents the formation of condensation on prototypes.

As for the regulation of humidity, the principle of the psychometerasman is applied here. This helps to accurately determine the relative humidity and setting parameters. For long-term low humidity tests, a control system with a built-in capacitive probe has been developed.

Envisys Technologies manufactures environmental chamber products like Industrial Chillers, Razor Blade Treatment Chambers, Industrial Dryers & Ovens, Rain Chamber, Altitude Chamber, Thermal Shock Chambers, Dust Chambers, Salt Spray Chambers, Vibration Test Chamber etc.